Car Repair World

ABS WHEEL SPEED SENSOR TESTING How To Test ABS Wheel Speed Sensor Use your trusty multimeter to check continuity through wheel speed sensors. This sensor has a value of about 1.5 K ohms. AC VOLTAGE With the meter set to AC voltage, spin the wheel by hand. The sensor should produce between .5 to 1 volt of AC current. The faster the wheel is spun, the more voltage is produced. BIAS VOLTAGE PASSIVE  SENSORS Some vehicles will send a DC voltage to the sensor through the ground wire. The signal will ride up on the DC signal. This is done so that the sensor can be tested by the ABS system without the vehicle moving. These types of vehicles will set WSS codes the moment the key is turned on. You can clear a WSS code and the moment the key is turned on, the code will immediately be back. The ABS computer is looking at the voltage coming back from the sensor. High resistance or an open circuit can be immediately detected. Often, with these systems the troub...

ABS CONTROL MODULE REPLACEMENT GUIDE Customers Who Noticed Problem With ABS Module Also Asked This Questions anti lock brake module anti lock brake module repair abs control module symptoms chevy abs module repair abs control module problems trailer brake control module abs module location abs control module autozone ABS Brake Light On After Wheel Bearing Replacement How to Replace an ABS Control Unit 2004 Nissan quest ABS Module Replacement Removal and Installation REMOVAL CAUTION: Before servicing the SRS, turn the ignition switch off, disconnect both battery cables and wait at least  3 minutes  . Disconnect the harness connectors for each air bag module and seat belt pre-tensioner. Remove center console lower cover. Disconnect diagnosis sensor unit harness connectors. Remove fixing bolts from the diagnosis sensor unit. CAUTION: Do not use old bolts; replace with new bolts. Check diagnosis sensor unit bracket to...