Car Repair World

Valve Cover Gasket Replacement Procedure To Replace Valve Cover Gasket In Your Car Helpful Information Oil is present inside the engine, this oil must be contained through the use of gaskets and seals, these units can wear and fail allowing oil to leak externally. A valve cover gaskets is located between the engine block and cylinder head, when it fails it can leak oil onto the exhaust manifold were it's burned with a noticeable odor. Parts and Supplies Needed New valve cover gasket set Shop towels Carburetor Cleaner Best Practices Recheck valve cover bolt tightness after a short time Avoid gasket material and dirt from getting into the engine Do not over tighten valve cover Clean engine before the valve cover is removed to avoid dirt contamination Easy step by step guide on how to replace an automotive engine valve cover gasket, though configurations will vary, the process is similar, this information pertains to most vehicles. Difficulty Le...

Intake Manifold Gasket Replacement Procedure To Replace Vehicles Intake Manifold Gasket Helpful Information An intake manifold is constructed in aluminum or plastic and are prone to leakage due to high engine temperatures and corrosion. Replacement of the intake manifold gaskets is common among older and high mileage vehicles. Always be couscous of dirt falling into the engine and take pictures of the job before and during the repair to help in reassembly. Best Practices Re-torque the intake manifold mounting bolts after a few miles of driving to help seal the gaskets. Replace the thermostat and gasket. Refill with new engine coolant Change engine oil and filter shortly after the job completion Step by step automotive repair guide on how to replace an intake manifold gasket, each application will be different, the repair will be similar in scope. Difficulty Scale: 6 of 10 Begin with the vehicle on level ground, engine cool (off) with the parking brake set. Use...