Ford Ignition Module With Diagrams
Ford F-350 Ignition Module Replacement Procedure REMOVAL & INSTALLATION See Figure 1 Fig. Fig. 1: A TFI-IV ignition module Remove the distributor cap from the distributor, and set it aside (spark plug wires still connected). Disconnect the harness connector. Remove the distributor. Remove the TFI module retaining screws. WARNING Step 5 must be followed EXACTLY; failure to do so will result in damage to the distributor module connector pins. To disengage the TFI module's terminals from the distributor base connector, pull the right side of the module down the distributor mounting flange and then back up. Carefully pull the module toward the flange and away from the distributor. Coat the TFI module baseplate with a thin layer of silicone grease (FD7AZ-19A331-A or its equivalent). Place the TFI module on the distributor base mounting flange. Position the module assembly toward the distributor bowl and carefully engage the distribut...