Car Repair World

Window Regulator with Motor Replacement Safety Tip: Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or closed toe shoes. 1 Remove the door handles and switches. Carefully remove the door trim panel. Photo may not be specific to your vehicle 2 Remove the vapor barrier. 3 Disconnect the glass from window regulator. 4 Tape the glass to door frame. The glass should not require removal. 5 Disconnect the electrical connector from the window motor. 6 Remove the window regulator mounting bolts. Slide the window regulator with motor out through the interior access opening of the door. 7 Install the new window regulator with motor and tighten the mounting bolts. 8 Reconnect the electrical connector to the window motor. 9 Install the window back onto the window regulator. 10 Re-install the vapor barrier. 11 Re-install the door trim ...

How To Replace Car Window Motor  Helpful Information An electric power window is controlled by three main parts; motor, regulator and a control switch and can fail in many ways, some of the more popular failures include non operation (stuck), window loose in its track sitting down while the motor turns. In some cases there are minor adjustments for the window rails to re-position the window if needed, check vertical operation for hard spots or clicking noises. All power window system are protected by a fuse which should be checked if the window is non-operational. Common Problems Motor shorts out and stops working, or works very slowly. The control switch short circuits, due to excessive amperage draw from a worn out motor. Easy step by step guide on how to replace an automotive window motor and regulator, though the configuration may vary, the process is the same, this information pertains to most vehicles. Difficultly Level - 4 Begin the vehicle on level ground, engine ...