Car Repair World

Parking brake & abs lights come on . 1999 chevy silverado abs codes co281 & co265 The first of the two codes is for the brake light switch, the one that is under the dash attached to the brake rod and brake peddle. Not much to diag on that one, if its bad it's bad, and when it sets the code that means it's bad. The second one is for the abs modual, it's under the truck on the drivers side. It is bolted to the top of the thing that has all of the brake lines going to it. MOST all of the time that code is set the modual is bad. It can be a little hard to get the bolts out they are torqs 20 or 25(i'm getting old). There are four of them holding down the modual. There are also a couple of connectors going to it. And some of the time it will blow the fuse for the abs under the hood(its in the underhood fues block). Make sure to clean off the modual before you pull it out. You don't want dirt getting in the solinoids for the BPMV(that's the thing it'...

Range Rover Trouble Codes OBD1 OBD1-diagnostic-trouble-codes-and-retrieval-method-1987-1989-land-range-rover Easy step by step guide on how to retrieve and define Range Rover OBD1 diagnostic trouble codes. Difficulty Scale: 2 of 10 Step 1  - When a code is stored the "check engine" light will illuminate. Most of these trouble codes are made up of two digits and are accessible under the passenger seat. Step 2  - Turn the ignition key to the "ON" position the trouble codes will start to display. The first set of blinking lights will be the "tenth" digit and the second set of blinks tell the "one" position.  Step 3  - Example, if the first blinking light flashes off and on twice, and the second blinking light flashes once the code number is 21. Step 4  - To restart code gathering sequence shut the key off and then back on again. Step 5  - To clear trouble codes after the repairs have been made turn the ignition key to the "o...