How Car Tires Work

Working Of Car Tires

Easy guide on how automotive tires work, wear patterns and maintenance guide, this information pertains to all cars.
Helpful Information
Sometimes a tire will have unusual tread wear patterns like flat spots, cupping or extreme wear on one side of the tire, these can be indications of weight overload, balance problem, under-inflation, failed front end suspension components or misalignment.
Maintenance
Tires can have different life expectancies depending on driver habits and road conditions. It's the responsibly of the driver to inspect tire condition ( small punctures, cuts and embedded sharp objects like screws, nails, broken glass and metal ) and to check air pressure regularly using a tire air pressure gauge. After an air pressure examination, reinstall the valve cap to prohibit moisture from entering the valve stem mechanism. Tires are designed to run on a specific air pressure according to weight, correct air pressure is essential for proper vehicle operation and will improve mileage and performance as well.
If a tire is ran under inflated, it will cause the sidewall to over work itself resulting in internal tire failure, under inflation can also cause poor gas mileage by increasing rolling resistance.
Most vehicle's tires can be rotated to increase usability, which always should be done front to back, never change the direction a tire rotates for this can cause the tire to come apart or have integrity issues.
A puncture can be detected by spraying soapy water on the suspected area and looking for bubbles as the air escapes, a patch or plug is then needed to repair the problem. ( Note: A patch performs better than a tire plug. )
The depth of  the tread should be inspected at every service interval and be replaced once the wear bars have been exposed.
Run Flat Tires
There are two types of these run flat tires; one construction includes an inner bladder that is filled with air that is used when the main tire has lost its air pressure, the other style of run flat tire is constructed of a thicker rubber sidewalls that will hold the vehicles weight. Vehicle's equipped with run flat tires usually means there is no spare tire.

 Automotive tires are made of flexible rubber which is vulcanized with wire and fabric and support the load while braking and steering. All tires feature their size, safety, load and air pressure information on the sidewall. Tires absorb impurities in the road helping provide a smooth ride and are available in many different styles designed for a variety of applications. Off-road vehicles tend to have a more aggressive tread pattern with a reinforced sidewall. Trailer tires are generally bias ply, while passenger car tires are a radial based construction.

Car Tire

Tire Wear Patterns
When a tire alignment is out of specifications, or the vehicle has a worn steering component such a tie rod end or a failed suspension part such as an upper control arm, it can cause the tire to wear prematurely due to the scuffing or feathering action.

Tire Scuffing

When a tire has been run overinflated the center of the tread will wear out prematurely and the vehicle will have a more ridged feel to the ride.
Tire Overinflated
Tire cupping is caused by a tire being out of balance, or a worn strut or shock which allows the tire to bounce which produces this uneven tread pattern.

Tire Cupping

Comments

  1. Anonymous29 May 2015 at 17:25

    This blog really helped me to understand how to tell whether my car's tires are in good condition or not. For the most part, all that I understood was the penny rule. The penny rule generally works, but it doesn't necessarily take enough details (such as tire scuffing) into account. http://www.metrotyreservices.com.au/tyres/

    ReplyDelete
  2. Unknown13 January 2016 at 12:28

    Great information here plus pictures! I find that the tires are one of the more important parts of our vehicles. They are the only contact points our vehicle has with the road, so choosing the right ones and caring for them is a must. Knowing the types of wear is important since then you'll know what you have to do to fix it. http://www.mitchellservicecentre.com.au/automotive-repairs/

    ReplyDelete

Post a Comment

Popular posts from this blog

Ford F-350 Engine Firing Order

Image
Ford Firing Order With Diagrams See Figures 1, 2, 3 and 4 To avoid confusion, replace spark plug wires one at a time. Fig. Fig. 1: 5.8L engine-nl-> Firing order: 1-3-7-2-6-5-4-8-nl-> Distributor rotation: Counterclockwise Fig. Fig. 2: 4.9L engine-nl-> Firing order: 1-5-3-6-2-4-nl-> Distributor rotation: Clockwise Fig. Fig. 3: 5.0L and 7.5L engines -nl-> Firing order: 1-5-4-2-6-3-7-8-nl-> Distributor rotation: Counterclockwise Fig. Fig. 4: 6.9L and 7.3L Diesel engines-nl-> Injection order: 1-2-7-3-4-5-6-8 This will help. Thanks.
Read more

Ford TFI-IV System Details And Diagrams

Image
Ford Engine TFI-IV System GENERAL INFORMATION See Figures 1 and 2 Fig. Fig. 1: TFI schematic Fig. Fig. 2: Exploded view of the TFI components The Thick Film Integrated (TFI-IV) ignition system uses a camshaft driven distributor with no centrifugal or vacuum advance. The distributor has a diecast base, incorporating a Hall effect stator assembly. The TFI-IV system module is mounted on the distributor base, it has 6 pins and uses an E-Core ignition coil, named after the shape of the laminations making up the core. The TFI-IV module supplies voltage to the Profile Ignition Pick-up (PIP) sensor, which sends the crankshaft position information to the TFI-IV module. The TFI-IV module then sends this information to the EEC-IV module, which determines the spark timing and sends an electronic signal to the TFI-IV ignition module to turn off the coil and produce a spark to fire the spark plug. The operation of the universal distributor is accomplished through the H...
Read more

how to replace Throttle position sensor on 2000 ford expedition

Image
Ford TPS Sensor Replacement Throttle Position Sensor The Throttle Position (TP) sensor is a potentiometer that provides a signal to the PCM that is directly proportional to the throttle plate position. The TP sensor is mounted on the side of the throttle body and is connected to the throttle plate shaft. The TP sensor monitors throttle plate movement and position, and transmits an appropriate electrical signal to the PCM. These signals are used by the PCM to adjust the air/fuel mixture, spark timing and EGR operation according to engine load at idle, part throttle, or full throttle. The TP sensor is not adjustable. The TP sensor receives a 5 volt reference signal and a ground circuit from the PCM. A return signal circuit is connected to a wiper that runs on a resistor internally on the sensor. The further the throttle is opened, the wiper moves along the resistor, at wide open throttle, the wiper essentially creates a loop between the reference signal and the signal return ret...
Read more