Brake Light Bulb Replacement
Safety Tip:Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or closed toe shoes.
1
Turn the key to the on position.
2
Depress the brake pedal.
3
Have an assistant inspect your tail lights and locate the burned out brake light bulb.
4
Turn key to the off position.
5
To gain access to brake light bulb, remove the lens assembly.
Photo may not be specific to your vehicle
Photo may not be specific to your vehicle
6
Remove the wiring harness from the lens assembly.
7
Disconnect the brake light bulb from the wiring harness.
Photo may not be specific to your vehicle
Photo may not be specific to your vehicle
8
Install the new brake light bulb.
9
Reconnect the wiring harness to the lens assembly.
10
Inspect the assembly housing gasket or seal for any damage or cracks - replace as required.
11
Reinstall the lens assembly.
12
Depress the brake pedal and have an assistant verify repairs.
No comments:
Post a Comment