Window Belt Strip Replacement
Safety Tip:Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or closed toe shoes.
1
Locate the window belt strips.
2
Visually inspect the belt strips for cracking, missing sections or any other damage that would require replacement.
Photo may not be specific to your vehicle
Photo may not be specific to your vehicle
3
Lower the window to its lowest position.
4
Using a pocket screw driver, carefully pry the belt strip away from the door panels.
Photo may not be specific to your vehicle
Photo may not be specific to your vehicle
5
Once a corner of the belt strip has been pried out, use a pair of needle nose pliers to carefully pull the belt strip out of its position and away from the clips.
6
Snap the new belt strip into place using the existing clips.
7
After the belt strip has been installed, roll the window up to ensure proper sealing and fit.
Thanks for sharing the safety tips that how can we Replace a Window Belt Strip. Keep Sharing something more like this.
ReplyDeleteCar Belt Repair