How to Replace a Tail Light

Tail Light Replacement

Safety Tip:Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or closed toe shoes.

1

Locate the tail light on the rear of your vehicle. They are located on each corner and light up when you apply your brakes or turn signal.

2

If applicable, remove any mounting screws on the outside of the tail light.

3

Open the trunk of your vehicle and locate the back of the tail light.

4

Remove the socket and bulb from the back of the tail light by turning and pulling.

5

Remove the tail light mounting screws or nuts.

6

Push the tail light out from behind.

7

Compare the old tail light with the new one to ensure correct fit.

8

Install the new tail light into the tail light pocket.

9

Tighten the mounting screws or nuts.

10

Install the bulb and socket into the new tail light.

11

Re-check the lights for proper operation.

12

Install any cover or trim that was removed for access.

Troubleshoot All types Of Car Problem With proper Solutions

http://carrepairworld.blogspot.com/2015/03/how-to-repair-car-problem.html

 

Know Exactly How Each And Every Part In Your Car Works

http://carrepairworld.blogspot.com/2015/04/how-does-it-work.html

 

Troubleshoot Car OBD Codes.Know Exactly What Each Code Means?

http://carrepairworld.blogspot.com/2015/04/vehicle-obd-ii-codes.html