Rec1

Wednesday 15 April 2015

How to Replace a Throttle Position Sensor

Throttle Position Sensor Replacement


Safety Tip:
Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or closed toe shoes.



1
Locate the OBD data link connector (DLC). Refer to your owner's manual for the specific location.
2
Turn your key to the ON position. Do not start the engine.
3
Plug your scan tool into the OBD data link connector. Turn on the scan tool and select the appropriate steps to read the diagnostic trouble code (DTC).
6021Photo may not be specific to your vehicle
4
Locate the throttle position sensor.
6019Photo may not be specific to your vehicle
5
Disconnect the electrical connector from the throttle position sensor.
6017Photo may not be specific to your vehicle
6
Test the resistance of the throttle position sensor (TPS) with a digital multi-meter. If the resistance is out of specifications, the TPS must be replaced.
7
Remove the throttle position sensor. Clean the sensor connector as needed using electrical contact cleaner or spray.
6015Photo may not be specific to your vehicle
8
Install the new throttle position sensor. Tighten the mounting screws and attach the electrical connector.
9
Erase the diagnostic trouble code (DTC) with the scan tool using the delete or erase command. Road test your vehicle to see if the check engine light returns.
6013Photo may not be specific to your vehicle

Troubleshoot All types Of Car Problem With proper Solutions

http://carrepairworld.blogspot.com/2015/03/how-to-repair-car-problem.html

 

Know Exactly How Each And Every Part In Your Car Works

http://carrepairworld.blogspot.com/2015/04/how-does-it-work.html

 

Troubleshoot Car OBD Codes.Know Exactly What Each Code Means?

http://carrepairworld.blogspot.com/2015/04/vehicle-obd-ii-codes.html


No comments:

Post a Comment