Rec1

Wednesday, 15 April 2015

How to Replace a Serpentine Belt

Serpentine Belt Replacement


Safety Tip:
Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or closed toe shoes.

1
Open your hood and locate your vehicle's serpentine belt.
2
Locate the serpentine belt routing diagram in the engine compartment, in the vehicle owners manual, or under the hood.
3
Locate the serpentine belt tensioner.
6716Photo may not be specific to your vehicle
4
Move tensioner to loosen the belt.
5
Remove the serpentine belt.
6
Install the new serpentine belt making sure the belt is routed the same way as before.
6714Photo may not be specific to your vehicle
7
Check the belt tension. Push down in the middle of a section of the belt. It should not move more than a half inch.
8
Start the engine and allow the car to run for a few minutes to ensure proper belt installation.
9
Turn the engine off and recheck the serpentine belt tension. Adjust tension if needed. May require belt tensioner replacement.

Troubleshoot All types Of Car Problem With proper Solutions

http://carrepairworld.blogspot.com/2015/03/how-to-repair-car-problem.html

 

Know Exactly How Each And Every Part In Your Car Works

http://carrepairworld.blogspot.com/2015/04/how-does-it-work.html

 

Troubleshoot Car OBD Codes.Know Exactly What Each Code Means?

http://carrepairworld.blogspot.com/2015/04/vehicle-obd-ii-codes.html

No comments:

Post a Comment