Car Fender Trim Replacement
This guide requires the following supplies:
Safety Tip:Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or closed toe shoes.
- Drill Bits
Safety Tip:Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or closed toe shoes.
1
Remove the fender trim by removing all the screws holding the fender trim in place.
Photo may not be specific to your vehicle
Photo may not be specific to your vehicle
Photo may not be specific to your vehicle
Photo may not be specific to your vehicle
2
Remove the fender trim from the fender by pulling it off.
3
Clean the new fender with soap and water.
4
Pre fit the new fender trim to make sure it is the correct size.
5
Install the new fender trim with the new screws into the fender.
Photo may not be specific to your vehicle
Photo may not be specific to your vehicle
No comments:
Post a Comment